• EKO International
  • EKO Spain
  • EKO Japan
Environmental measurement & analysis
EKO Instruments - clouds header

MF-190 Heat Flux Sensor

MF-190 Heat Flux Sensor

Features

  • Thinnest heatflux sensor on the market
  • Large area sensor 
  • Low thermal resistance

The MP-190 is a large area (310 x 310mm) flexible thin foil heat flow sensor. It can be easily rolled on a curved surface and attached to large surface areas. Due to its large sizes it gives properly averaged thermal conductivity results for large areas without the potential risk of measuring local hot spot effects or thermal bridges.    

 

For the measurement of:

  • Evaluation of floor heating Research on heating efficiency of various lamps and other light sources
  • Investigation of the heating efficiency of drying machines, heating systems, etc.
  • Measurement of radiative heating and heating absorption of various parts of an automobile
  • Research of radiative heating of various plants

 

The low output Voltage of the heat flow sensor can be easily converted to a 4-20mA current or higher Voltage using the MS-4..20mA converter. The mV/mA converter can be pre-programmed and optimized within the operating range compatible with common measurement equipment.     

Specifications

Specifications MF-190
Measurement place Indoor
Thermal resistance (m2・°C/W) 3.04 x 10-3
Substrate Glass epoxy
Cladding Polyester
Operating temperature range (°C) -30°C ~ +120°C
Size (L x W x T, mm) 310 x 310 x 0.7
Sensitivity (mV/W/m2) at 20°C 0.20
Impedance (Ω) Approx. 600 ~ 900
Weight (g) 100
Reproducibility (%) +/- 2
Remarks high sensitivity

 

Images

Downloads

Related products