MP-410 MPPT Electric Load
- MPPT for PV module performance rating
- Uninterrupted PV module power rating under variable solar conditions
- PV module Life time testing under Maximum power conditions
- Pmpp = 300W
The MP-410 Electronic Load is an active electronic load which can be connected to a PV module to track and control the Maximum Power Point (MPP) of a PV module.
The MP-410 electric load can be used for continuous module performance evaluation of single PV modules up to 300W. Based on the advanced MPP tracking function the PV module power will be automatically regulated and can be monitored when exposed to solar irradiance or sun simulator. Contrary to regular I-V tracers the MP-410 can provide uninterrupted information about the maximum performance operating point of the module and is the best solution to rate a PV module under variable weather conditions. The output (I and V) can be independently measured, by using external shunt resistors in combination with an additional data-logger or measurement device.
The MP-410 can be used stand alone or in combination with the MP-160 I-V tracer system. In combination with the MP-160 I-V tracer system, the PV module can be kept at the MPPT between two I-V measurements. In this case the PV modules remain under load and can be tested under realistic field conditions. This way long term performance and potential aging effects can be monitored at module level.
|Specifications||MP-410 Electric Load
|Voltage input range
||5 - 200V (max. 235V)
|Current Input range
||10mA - 10A (max. 20A)|
|Power rating||250W (max. 300W @ 20°C)|
|Output Voltage||To be measured with external shunt resistor|
|Output Current||To be measured with external shunt resistor|
|Overrange Protection||Temperature 80°C / Over Voltage / Over Current|
|Size||323 L x 188 W x 51 H (mm)|
|Power supply||AC Adapter (IN: AC100~240V, 50~60Hz, OUT:DC12V, 1A)|